Home Forums Hunting & Shooting Gunsmithing Belt/Disc Sander Recommendation

I love those old Rockwell machine tools. I have an old Rockwell drill press. Made to last....

May want to take a look at this at HF.

http/ www.harborfreight.com/4-inch-x-36-i..._source=1031&cid=mEmail_s1031_c3614c

That is good. Thanks

The common 6"x48"/9"are $100-150 off Craigslist all the time, only the odd time do the bearings go. simple fix. If you want a nice cast iron table ,the Delta 6'x48"/12" are about three times as much. I've used both a lot, the sanding performance is the same. BTW the last Deltas were made in CHINA.Also old Delta parts are no longer available from the current Delta.

The common 6"x48"/9"are $100-150 off Craigslist all the time, only the odd time do the bearings go. simple fix. If you want a nice cast iron table ,the Delta 6'x48"/12" are about three times as much. I've used both a lot, the sanding performance is the same. BTW the last Deltas were made in CHINA.Also old Delta parts are no longer available from the current Delta.