|
Joined: Feb 2010
Posts: 17,927
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 17,927 |
You asked for opinions and these folks will tell you what they think...whether it is right for you or not is something only you can decide.
I have owned damn near everything the VG and Tikka. Not the RAR as it felt like a POS. The VG shot great but never felt good and was toward the heavy side. The Tikka is cheap feeling but shoots great and is very light. I fixed the feel by painting the stock with the Tan flat stuf with grit in it. Now it looks, feels and shoots great. Put a good scope on and I'm happy. Pick the one that feels the best to you and spend your money. Good Luck! It doesn't work that way. OP asks question, gets suggestion (notice mine wasnt even on the list) then is shamed into buying what he doesn't want, and fits in with the crowd. Or what Stick says, which is generally well thought out, but against the masses. You must be new.
|
|
|
|
Joined: Feb 2007
Posts: 7,968 Likes: 6
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2007
Posts: 7,968 Likes: 6 |
Weatherby uses Howa actions to build the Vanguard. All parts interchange, but the Vanugard uses a different safety, barrel, stock and trigger. They are similar, but not the same. FWIW, I prefer the Howa. I like the rifles,had both, but they are overweight for my uses. Get one scoped and you are talking about 9+ lbs, maybe closer to 10 lbs depending on the scope and mounts.
The Tikka or Ruger can come in under 7 lbs scoped if you choose carefully. Both are more accurate than the Howa/Vanguards I've owned. I like both for what they are, budget rifles that shoot very well. I'd save the money and buy the Ruger personally, but all 3 can be good rifles.
Most people don't really want the truth.
They just want constant reassurance that what they believe is the truth.
|
|
|
|
Joined: Aug 2012
Posts: 931
Campfire Regular
|
Campfire Regular
Joined: Aug 2012
Posts: 931 |
Ok, have it your way. You're the one sniping...I offered an opinion. The OP should buy what feels good to him. Took you so little time to offer your criticism of someone else...
50+ years of hunting experience say not new. But, I forgot that you really did not offer advice...
|
|
|
|
Joined: Mar 2011
Posts: 4,883
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,883 |
The wimpy bolt stop has kept me from owning Howa/VG, but many people never have a problem. I've asked around and more than a few here have pulled the bolt clear out of the receiver when running the action hard. When I run the bolt on game, my brass damn near goes into orbit
Last edited by 4th_point; 04/06/15.
|
|
|
|
Joined: Mar 2011
Posts: 4,883
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,883 |
I've had Tikkler safeties click "off"... if you're prone to carrying one up the pipe its something to think about. Never had a case or primer let loose in one, but there isn't much in the Tikka design to contain or divert gas.
|
|
|
|
Joined: Feb 2010
Posts: 17,927
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 17,927 |
Ok, have it your way. You're the one sniping...I offered an opinion. The OP should buy what feels good to him. Took you so little time to offer your criticism of someone else...
50+ years of hunting experience say not new. But, I forgot that you really did not offer advice... It was just a joke............
|
|
|
|
Joined: Sep 2004
Posts: 17,478 Likes: 4
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2004
Posts: 17,478 Likes: 4 |
This is the Tikka gas system. What about it is inadequate?
"The receiver ring has a single gas port in the left side which aligns with a hole in the bolt head to vent escaping gas out to the side. The bolt body has no ports to direct escaping gas downward into the magazine well. Gas entering the firing pin hole that reaches the rear of the action is blocked by the solid rear wall of the bolt sleeve."
“Live free or die. Death is not the worst of evils.” - General John Stark.
|
|
|
|
Joined: Mar 2011
Posts: 4,883
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,883 |
This is the Tikka gas system. What about it is inadequate?
"The receiver ring has a single gas port in the left side which aligns with a hole in the bolt head to vent escaping gas out to the side. The bolt body has no ports to direct escaping gas downward into the magazine well. Gas entering the firing pin hole that reaches the rear of the action is blocked by the solid rear wall of the bolt sleeve." That just describes gas entering the bolt body and getting vented through a single port. What happens when gas enters the left lug raceway? Pops the plastic cork?
Last edited by 4th_point; 04/06/15.
|
|
|
|
Joined: Sep 2004
Posts: 29,383
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2004
Posts: 29,383 |
This is the Tikka gas system. What about it is inadequate?
"The receiver ring has a single gas port in the left side which aligns with a hole in the bolt head to vent escaping gas out to the side. The bolt body has no ports to direct escaping gas downward into the magazine well. Gas entering the firing pin hole that reaches the rear of the action is blocked by the solid rear wall of the bolt sleeve." That just describes gas entering the bolt body and getting vented through a single port. What happens when gas enters the left lug raceway? Pops the plastic cork? Bullshit...the plastic "cork" as you call it is just cosmetic. Obviously you have not taken a bolt apart or you would not be spewing this nonsense.
|
|
|
|
Joined: Mar 2011
Posts: 4,883
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,883 |
Easy test... stick the nozzle from your compressor into the Tikkler muzzle and see where the air exits. It comes straight down the left lug raceway and around the plastic cork at the shooter's face and eye. Now this is only 120 psi and not 60k+ psi, so its not a scientific test but I suspect hot gas from a ruptured case will follow a similar path.
Better yet take the cork off the bolt, reinsert bolt into action and take a pic for us looking down the left lug raceway. Maybe shine a light down the bore. I don't own any Tikklers anymore or else I'd do it for you.
Even more better...
Tell us what stops gas traveling down the left lug raceway?
I'm looking forward to you educating us on the Tikkler gas handling. Or are you just going spew insults with no information?
Last edited by 4th_point; 04/07/15.
|
|
|
|
Joined: Mar 2011
Posts: 4,883
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,883 |
And I agree that the cork is just cosmetic.
Looking forward to pics and explanation.
Thanks,
Jason
|
|
|
|
Joined: Sep 2004
Posts: 29,383
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2004
Posts: 29,383 |
And I agree that the cork is just cosmetic.
Looking forward to pics and explanation.
Thanks,
Jason "The receiver ring has a single gas port in the left side which aligns with a hole in the bolt head to vent escaping gas out to the side. The bolt body has no ports to direct escaping gas downward into the magazine well. Gas entering the firing pin hole that reaches the rear of the action is blocked by the solid rear wall of the bolt sleeve."
It has been explained to you by another poster on this thread. Please provide proof of a Tikka injuring a shooter or blowing up because of action design.
|
|
|
|
Joined: Mar 2011
Posts: 4,883
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,883 |
Let me explain it again, that quote describes the gas handling for gas entering the firing pin hole. A ruptured case is going to send gas down the raceway.
How does it stop the gas going down the raceway, or are you just going to avoid the question?
|
|
|
|
Joined: Sep 2004
Posts: 17,478 Likes: 4
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2004
Posts: 17,478 Likes: 4 |
No. A scientific test would be to do the same with an expanded case fired in that chamber and the primer pocket open, as would be in a over pressure situation.
Your "test" isn't testing real conditions.
Do the same "test" on any bolt action and the results will be similar.
And, a ruptured case will vent down the bore if the bore is not blocked.
Last edited by David_Walter; 04/07/15.
“Live free or die. Death is not the worst of evils.” - General John Stark.
|
|
|
|
Joined: Sep 2004
Posts: 29,383
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2004
Posts: 29,383 |
Let me explain it again, that quote describes the gas handling for gas entering the firing pin hole. A ruptured case is going to send gas down the raceway.
How does it stop the gas going down the raceway, or are you just going to avoid the question?
Name a rifle other then a Weatherby Mark V that keeps gas from hitting the shooters face when sending gas down either one of the the raceways. The back of the tikka firing pin assembly fits in the bolt with minimum tolerance, that makes the bolt safer not the plastic shroud. You were implying that the Tikka design was unsafe, I asked you to provide proof.
|
|
|
|
Joined: Mar 2011
Posts: 4,883
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,883 |
No. A scientific test would be to do the same with an expanded case fired in that chamber and the primer pocket open, as would be in a over pressure situation.
Your "test" isn't testing real conditions.
Do the same "test" on any bolt action and the results will be similar.
And, a ruptured case will vent down the bore if the bore is not blocked. Not quite David. If you put compressed air down the barrel of a Savage, the front baffle sends that air out the left and right ports. Let me give you some examples of gas handling for the left raceway: 1. Mauser 98 - c-collar, and a 90-degree flange at the end of the bolt. 2. Savage - as mentioned front baffle, and a rear baffle on bolt. 3. Rem 700 - bolt nose inside of barrel breech. 4. Win 70 (newer) and MRC - baffle attached to bolt body that rests in left raceway.
Last edited by 4th_point; 04/07/15.
|
|
|
|
Joined: Mar 2011
Posts: 4,883
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,883 |
And, a ruptured case will vent down the bore if the bore is not blocked.
If so, why do some rifles have designs to handle stray gas in the left lug raceway? Again, I ask the original question, "What stops gas from traveling down the left lug raceway in a Tikka?"
|
|
|
|
Joined: Mar 2011
Posts: 4,883
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,883 |
Name a rifle other then a Weatherby Mark V that keeps gas from hitting the shooters face when sending gas down either one of the the raceways. The back of the tikka firing pin assembly fits in the bolt with minimum tolerance, that makes the bolt safer not the plastic shroud. You were implying that the Tikka design was unsafe, I asked you to provide proof.
Savage. And as stated, I'm not talking about the gas entering the firing pin. Please answer the question, "What stops gas from traveling down the left lug raceway in a Tikka?"
|
|
|
|
Joined: Sep 2004
Posts: 29,383
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2004
Posts: 29,383 |
Comparing a Savage with a Weatherby Mark V in the gas handling department. That is quite rich.
There is no problem with gas traveling up the leftside bolt rail since there is a precise fit between shroud and the receiver. Since the cartridge is well supported in the chamber , the chances of a rupture are NIL anyway. Please list out all the Tikka failures you have found on the internet. While you are at it list out the Tikklers trigger failures as well.
|
|
|
|
Joined: Mar 2011
Posts: 4,883
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,883 |
What shroud?! Like I wrote earlier, take the plastic off and take a pic for us. I'm open to learning but want to see it.
And what does the trigger have to do with anything?
|
|
|
|
366 members (160user, 1badf350, 222Sako, 260Remguy, 1Longbow, 06hunter59, 42 invisible),
11,027
guests, and
1,259
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,195,343
Posts18,546,448
Members74,060
|
Most Online21,066 May 26th, 2024
|
|
|
|