Well I finally got a chance to try a couple of my new Mihec molds. Funny thing is I waited over a year to get them, and then was moving around the time they arrived so nearly another year before using them. The 360640L is a ~130 gr hp mold for 38's and 357's. I cranked out 500 with the deep pin, tried 3.5 and 4.0 gr of 700X in 38 sp cases and then loaded up the remaining over 3.8 gr of 700X. Accuracy from both a Taurus 85 and 357 blackhawk was good.
The other new Mihec is a 452640 ~270 gr hp. I haven't had a chance to load any but they should work well out my wife's 45 bisely convertable.
I also just finished another batch of Lee 200 gr 45 swc's for plining with the 45's. Six cavity molds cast fast and tumble lubing sure saves time!
