Sorry, the reamer is proprietary to us, so I won't be posting a pic of it.
The neck is a little shorter than the Mashburn, shoulder angle is adjusted slightly but still in the 30-35* range. This moves the shoulder ahead slightly from the Mashburn and gives it a few more grains of capacity. I did develop the specs and have the reamer designed.
Forming is pretty easy. Run a 300WM case through the 7 Rogue FL sizer and shoot it. I have been running full power loads in the new brass with no issues at all. Like the Mashburn, its only blowing the case out slightly at the shoulder, so really its like a piece of virgin brass in a standard chamber.
Last edited by TMR; 07/03/12.
