Finally had a chance to get the more "final" version of the 7mm Rogue finished up late last night. Still waiting on the new stock design, but bear season is approaching so I dropped it in an extra McMillan A-3 I had laying on the shelf. Broke her in today and am happy with the little tweaks I made to the reamer. My reduced "forming" charges are clipping along at 3147 with a 180 Berger. Shot a nice little sub 3" group at 675yds with virgin cases with the forming load. Will most likely run through these 100 cases and then load them up with the hot load. The barrel should be stabilized by then. Hell, the reduced charge is sub 1/2moa accuracy and plenty fast.

Specs:
R Bros Rogue Action w/hunter port
Broughton R Bros spec'd contour, fluted, 1-9 twist, 27" finish
PTG Alum BDL
McMillan A-3
20MOA Alum Rail
Jewell Trigger 1.75lbs
DE Muzzle Brake
DE Cheekpiece
NF 5.5-22x50 w/UL rings

Total weight w/o the bipod is 10.5lbs
The new stock design should get it down to 10lbs or at least the same.
[Linked Image]