No objections so here goes....... [Linked Image]

.223 AI PN #2 contour on a 700 action in a McM Classic bedded by me (which I'm thinking is the issue as I've looked at everything else).

The three groups were shot last night at 200 yards, load is-

Formed Lapua case
CCI BR-4
27.0 RL-15
Sierra 65 SBT kissing the lands

I get the same two in one out with 75 AMAX as well.

Scope has been swapped, screws are tight, good trigger, bench technique is solid, went so far as to shoot it with the mag assembly removed to check for binding, 45 inch pounds on the action screws, front sight base screw not bottoming out. I'm at a loss on this one........