The Lee push through sizes along with either thinned Alox/Xlox or the 45/45/10
http://lsstuff.com/store/index.php?...p;zenid=dcecc541d664237a0f6278201d72195d lube will wok just fine.
I have 6 of the lee push through sizers and made up enough 45/45/10 of my own to last me years,it's what I lube all my cast rifle and pistol bullets with in velocities that range from 900 to 2K fps.in both plain base as well as gas check designs and it's work just fine regardless of the bullets lube groove design.
I've found that warming the bullets as well as the lube before application and just using enough lube say 10 to 15 drops per 50 bullets to begin with that give you a light golden sheen is all that needed. You can always add a bit more lube if there not coated to your satisfaction on the first application. I generally apply two light coats once before and once after sizing.
