I have the RCBS Case Master and honestly I think this stuff is hard to get repeatable data. For example I went down and measured runout on new 223Rem brass. Three of the brass had like .005ish run out and one had .004. Is this typical of new brass?
Yes, it is. You're going to shoot for .003 or less with 223 brass
I think someone a while ago mention that RCBS Case Master is the worse of all concentriity gauge. Is this the general consensus?
I have the "old style" v-block Sinclair concentricity gauge, the current Sinclair gauge, and a Case Master. They're all good.
And I have tried the same peice of brass, using the same dial indicator, with all three gauges with pretty consistent readings.
Buy the one you like.
Casey