One thing to watch for. When the set function is dialed out, the trigger won't pivot forward. The trigger slot in the bottom metal is pretty tight. When removing the barreled action from the stock, and the trigger blocked for forward pivot, the MIM part can get in a bind and isn't that hard to break.

I cut the trigger slot around 3/8' rearward to give more room. And, disgusted with MIM parts, replaced the CZ trigger with a Timney. The Timney sits farther back in the trigger guard and positions the trigger finger back from the bolt handle. With this flat, butter knife handle, that is a good thing. Probably not as big a deal with the conventional bolt handle.

I also put a weaker spring in the safety and it will now slip back and forth without an audible click.

DF

[Linked Image]