Was shooting CTR at 250 yards from solid field rest and had two hit within an inch, but third was 2+ inches away.
At first I thought caffeine jitters but had good press, etc. I looked the rifle over and saw a tiny chip on edge of rifling; so much for trusting the toe of a muck boot on the floorboard!
Should I just try a round brass screw or mil surplus 7mm FMJ and lapping compound or get a Manson crowning tool. Trying to avoid expensive gunsmith trip with this "peasant rifle."
The holes in the steel are from a BIL who didn't understand that Failsafes weren't Softpoints a few years back.
[img:left]
[/img]