|
|
|
|
Joined: Jul 2010
Posts: 2,727
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2010
Posts: 2,727 |
I recently installed a B&C Alaskan stock on my Rem 700 XCR-II in .25-06 (not the medalist or Alaskan II). The stock fit in all areas was great! Tang, ejection port, bottom metal were spot on, and the gap on either side of the barrel was even. I also swapped the trigger for a Timney. Rifle shot to original point of aim and groups were the same (just over 1 MOA). Eventually I may get around to bedding the lug but I want to get input from you guys about sanding off the pads at the fore end tip. Anyone else see significant changes when doing that? I was finishing off some Hornady ammo to get ready to reload some 115 BTs and 110 Accubonds, so load development should improve group size. I'm not worried about voiding the warranty by breaking out the Dremel tool on the stock so what say you??
Last edited by philgood80; 07/30/17.
Government is like a baby: An alimentary canal with a big appetite at one end and no sense of responsibility at the other. - Ronald Reagan
For why should my freedom be judged by another man's conscience? - 1 Corinthians 10:29
|
|
|
|
|
Joined: Apr 2011
Posts: 12,186 Likes: 6
Campfire Outfitter
|
|
Campfire Outfitter
Joined: Apr 2011
Posts: 12,186 Likes: 6 |
I always take out the "speed bumps..." Generally wrap a piece of 60 grit or 80 grit around an appropriately sized deep well socket...
|
|
|
|
|
Joined: Apr 2008
Posts: 10,960 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2008
Posts: 10,960 Likes: 1 |
I always take out the "speed bumps..." Generally wrap a piece of 60 grit or 80 grit around an appropriately sized deep well socket... What he said.
|
|
|
|
|
Joined: Dec 2008
Posts: 78,306 Likes: 2
Campfire Oracle
|
|
Campfire Oracle
Joined: Dec 2008
Posts: 78,306 Likes: 2 |
I always take out the "speed bumps..." Generally wrap a piece of 60 grit or 80 grit around an appropriately sized deep well socket... What he said. Yep...first thing...
"...the left considers you vermin, and they'll kill you given the chance..." Bristoe
|
|
|
|
|
Joined: Jul 2010
Posts: 2,727
Campfire Regular
|
|
OP
Campfire Regular
Joined: Jul 2010
Posts: 2,727 |
Ok. Survey says: Do it.
I'll see how she does. Thanks guys!!
Government is like a baby: An alimentary canal with a big appetite at one end and no sense of responsibility at the other. - Ronald Reagan
For why should my freedom be judged by another man's conscience? - 1 Corinthians 10:29
|
|
|
|
|
Joined: Aug 2007
Posts: 150
Campfire Member
|
|
Campfire Member
Joined: Aug 2007
Posts: 150 |
I did it to my 1st generation 700 Ti and obviously the POI changed and the grouping size stayed the same.
I used the deep socket and sand paper method too, but just go easy, it cuts it real fast.
I love that stock.
Retired and loving it.
|
|
|
|
|
Joined: Nov 2008
Posts: 153
Campfire Member
|
|
Campfire Member
Joined: Nov 2008
Posts: 153 |
So what's wrong with the accuracy your getting now?
Diplomacy is the art of saying "Nice doggie" until you can find a rock.
Will Rogers
|
|
|
|
|
Joined: Aug 2009
Posts: 302
Campfire Member
|
|
Campfire Member
Joined: Aug 2009
Posts: 302 |
A big depends. I have an m70 that needs the bump or full bedding. Also will add that bedding a m700 in the bc m40 stock really helped
|
|
|
|
|
Joined: Sep 2004
Posts: 29,383
Campfire Ranger
|
|
Campfire Ranger
Joined: Sep 2004
Posts: 29,383 |
I recently installed a B&C Alaskan stock on my Rem 700 XCR-II in .25-06 (not the medalist or Alaskan II). The stock fit in all areas was great! Tang, ejection port, bottom metal were spot on, and the gap on either side of the barrel was even. I also swapped the trigger for a Timney. Rifle shot to original point of aim and groups were the same (just over 1 MOA). Eventually I may get around to bedding the lug but I want to get input from you guys about sanding off the pads at the fore end tip. Anyone else see significant changes when doing that? I was finishing off some Hornady ammo to get ready to reload some 115 BTs and 110 Accubonds, so load development should improve group size. I'm not worried about voiding the warranty by breaking out the Dremel tool on the stock so what say you?? I think bedding the lug is a higher priority then removing the pads off the foreend tip.
|
|
|
|
|
Joined: Jan 2010
Posts: 2,621
Campfire Regular
|
|
Campfire Regular
Joined: Jan 2010
Posts: 2,621 |
Bedding around the recoil lug (only contact at the rear) and forward about 1.5" under the shank stiffened up the forend a good bit and improved the accuracy for me.
John 8:12 "I am the light of the world. Whoever follows me will never walk in darkness, but will have the light of life."
|
|
|
|
|
527 members (1minute, 219 Wasp, 007FJ, 2500HD, 222Sako, 71 invisible),
2,264
guests, and
1,223
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums81
Topics1,193,121
Posts18,502,371
Members73,987
| |
Most Online11,491
Jul 7th, 2023
|
|
|
|
|
|
