Home Forums Hunting & Shooting AR and Tactical Rifles swapping AR-15 A2 stock to Skeleton stock question

I have a 450 Bushmaster (factory, not build) and want to change the A2 type stock it came with to a AR-15 ARFX Skeleton Stock. See link below for the one I'm looking at.
Will I need to get the Tube, Spring, and assembly, or can I use what is in the A2 type stock it came with?

Don't mind opinions for other stock options, but I do want to change out the A2 type it came with.

Thanks in advance

AR-15 ARFX Skeleton Stock

Have 2 ace stocks.
You won't be dissatisfied.

Have one on an AK and like it.

Use the A2 hardware - mounted a dozen or more of them.

The rubber sleeve will most likely be a bee-atch to slide over the buffer tube, but the rest is pretty straight forward.

You don't need the A2 spacer for the Ace - IIRC, but check the instructions.

Excellent, Thanks!

I've use soapy water for this tight slip on padding issues with bike bar padding. once it dries it won't move again. I'll give it a try if it's an issue, thanks for heads up