Chambered in 7mm IHMSA. Low round count McMillan center grip stock Nice light , crisp trigger Mini M16 extractor Finished in black cerakote I just had the stock refinished in Cerakote. Black W/webbing Muzzile brake The scope base has also been cerakoted Skeletonized bolt handle. Front sling swivel stud
It has been very accurate with 162 ELD-M’s and 140gr Accubond’s @ 2420 FPS.
Includes RCBS FL die seat with seater. Also included is a Redding neck die.
30 or so formed cases (.300 Savage R-P)
$1375.00 Shipped. Apple Pay, Postal MO or check. Ships when check clears.
Will considering trading for Nightforce or Leupold scopes. Must have turrets and a MOA reticle.
Last edited by SMACK; 04/30/22.
All the best things in life, live on the other side off fear.
The true eye sees not the despair of its victims, only the elegance of equilibrium. It's a demonstration of superior judgment.
Less than 200. I haven’t checked the chamber. I have only shot the 30 or so cases I got with it a couple times. It was a spontaneous purchase . This is what it looked like before I had Orgun Gunsmithing refinish the stock and metal. Add a sling swivel stud and muzzle brake. I planed on hunting with it but haven’t got around to using it.
The case neck wall thickness on the brass I got with it is .011 . They have been turned.
The Cerakote, stud and stock refinishing ran me $475.00 .
Last edited by SMACK; 05/01/22.
All the best things in life, live on the other side off fear.
The true eye sees not the despair of its victims, only the elegance of equilibrium. It's a demonstration of superior judgment.
Well, darn it all anyway - an XP100 in a center grip stock has been on my bucket list for a long time but I haven't found just the right one. Been drooling over this one since you posted it and it sounds like I should be able to neck up Lapua 22-250 brass (which seems to be readily available) to make 7mm IHMSA. I can no longer resist, so let's send it to Montana - PM incoming...
