|
|
Joined: Jun 2001
Posts: 10,792 Likes: 1
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Jun 2001
Posts: 10,792 Likes: 1 |
I have a Zeiss Conquest Scope with 1 inch tube that is "fat" for the rings. It has a gap that is visible under the front ring when the scope is sat in. My Leupold scope doesn't do this. I pulled out the calipers and the scope body is a few thousands off 1.006? Now what can I do? I have a Leupold single piece mount on the Remington 700 short action and was attempting to use Leupold Medium standard 1 inch rings that the scope won't fit. Are there any other rings compatible with the Leupold base? Otherwise recommend rings and base please? Thanks.
|
|
|
|
Joined: Jun 2004
Posts: 44,868 Likes: 4
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,868 Likes: 4 |
Maybe a set of these: http://www.burrisoptics.com/sigrings1.htmlThe inserts may give you a little squish room.
|
|
|
|
Joined: Jun 2001
Posts: 10,792 Likes: 1
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Jun 2001
Posts: 10,792 Likes: 1 |
Thanks, much appreciated. I'm trying to set up a 5 r milspec in 308 for up to 600 yards? I have the Rapid Z 600 model and pondered if I need a 20 MOA base which would completely switch my base and rings to begin with?
|
|
|
|
Joined: Jun 2004
Posts: 44,868 Likes: 4
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,868 Likes: 4 |
If you're not going to use the reticle, but dial to hold on center at all distances instead, then the need for a tilted rail depends on the adjustment range of the scope.
You can use offset bushings in those rings I mentioned to build in "preloaded MOA tilt" the same way a rail base does.
|
|
|
|
Joined: Jun 2001
Posts: 10,792 Likes: 1
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Jun 2001
Posts: 10,792 Likes: 1 |
|
|
|
|
569 members (1936M71, 17CalFan, 10Glocks, 12344mag, 160user, 1Longbow, 65 invisible),
2,356
guests, and
1,458
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,681
Posts18,493,892
Members73,977
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|