|
|
Joined: Apr 2006
Posts: 1,005
Campfire Regular
|
OP
Campfire Regular
Joined: Apr 2006
Posts: 1,005 |
I have some once fired Creedmor brass I got from a buddy. It will not chamber in my rifle at all before running thru the dies. I have run it thru a full length Hornady die and it still will not chamber in my rifle. It measures longer than the brass fired in my rifle, so I trimmed to length, still no go. I have tried brass fired in my rifle and sized and it works fine. Any ideas. Thanks Coach
|
|
|
|
Joined: Apr 2006
Posts: 1,005
Campfire Regular
|
OP
Campfire Regular
Joined: Apr 2006
Posts: 1,005 |
I just tried grinding some off the shell holder and that did not help. The necks measure the same for both my brass and his. I will try to cut off a neck to see if the neck is the problem.
|
|
|
|
Joined: Apr 2013
Posts: 7,025 Likes: 2
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2013
Posts: 7,025 Likes: 2 |
Sounds like your friend has a loose chamber.
|
|
|
|
Joined: Apr 2006
Posts: 1,005
Campfire Regular
|
OP
Campfire Regular
Joined: Apr 2006
Posts: 1,005 |
OK I ran the brass thru a SB 308 die and it now fits my chamber. It was hard to get to go in the SB dies but it did go. I then ran in the CM dies and trimmed to length. My buddies rifle is a Tactical Rifles custom, it must have an out of spec chamber.
Coach
|
|
|
|
499 members (10gaugeman, 1234, 160user, 1beaver_shooter, 22kHornet, 10gaugemag, 54 invisible),
3,934
guests, and
1,388
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,700
Posts18,534,642
Members74,041
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|