|
|
|
|
Joined: Apr 2006
Posts: 1,005
Campfire Regular
|
OP
Campfire Regular
Joined: Apr 2006
Posts: 1,005 |
I have some once fired Creedmor brass I got from a buddy.
It will not chamber in my rifle at all before running thru the dies.
I have run it thru a full length Hornady die and it still will not chamber in my rifle.
It measures longer than the brass fired in my rifle, so I trimmed to length, still no go.
I have tried brass fired in my rifle and sized and it works fine.
Any ideas.
Thanks
Coach
|
|
|
|
|
Joined: Apr 2006
Posts: 1,005
Campfire Regular
|
|
OP
Campfire Regular
Joined: Apr 2006
Posts: 1,005 |
I just tried grinding some off the shell holder and that did not help.
The necks measure the same for both my brass and his.
I will try to cut off a neck to see if the neck is the problem.
|
|
|
|
|
Joined: Apr 2013
Posts: 7,024 Likes: 2
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2013
Posts: 7,024 Likes: 2 |
Sounds like your friend has a loose chamber.
|
|
|
|
|
Joined: Apr 2006
Posts: 1,005
Campfire Regular
|
|
OP
Campfire Regular
Joined: Apr 2006
Posts: 1,005 |
OK I ran the brass thru a SB 308 die and it now fits my chamber.
It was hard to get to go in the SB dies but it did go. I then ran in the CM dies and trimmed to length.
My buddies rifle is a Tactical Rifles custom, it must have an out of spec chamber.
Coach
|
|
|
|
|
632 members (160user, 1beaver_shooter, 1shotnokilz, 1eyedmule, 1Longbow, 1234, 74 invisible),
3,612
guests, and
1,174
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums81
Topics1,194,636
Posts18,533,365
Members74,041
| |
Most Online11,491
Jul 7th, 2023
|
|
|
|
|
|
