|
Joined: Jan 2009
Posts: 3,058
Campfire Tracker
|
OP
Campfire Tracker
Joined: Jan 2009
Posts: 3,058 |
Want to put a Vari-X III 1.75-6x32mm E w German No.1 onto my .358 Frontier w/o going to High or Extra-High rings.
Took the four hex screws outta the fwd base but it won't come off. Looks like two blued steel studs also keep base on barrel.
The manual, of course, doesn't even want you to use a conventional scope on a Frontier, so it gives no clue.
Figured I'd check with Y'all before I break out a pry bar to see if any of you have successfully overhauled a Frontier for std scope with ocular bigger than 1-in. or so.
Last edited by ColdCase1984; 10/25/14.
�When in doubt, I whip it out.� Uncle Ted
|
|
|
|
Joined: Jan 2009
Posts: 3,058
Campfire Tracker
|
OP
Campfire Tracker
Joined: Jan 2009
Posts: 3,058 |
�When in doubt, I whip it out.� Uncle Ted
|
|
|
|
Joined: Apr 2006
Posts: 3,326
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2006
Posts: 3,326 |
Check with the guys on the gunsmithing board. I recall being told once that the rib on number ones is torqued down super tight and is a pain to remove, but just screwed on. I would bet the frontier is similar.
|
|
|
|
Joined: May 2006
Posts: 1,009
Campfire Regular
|
Campfire Regular
Joined: May 2006
Posts: 1,009 |
The rib on #1's is both screwed and pinned, there are 2 pins .
Flyer
|
|
|
|
Joined: Aug 2014
Posts: 39
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Aug 2014
Posts: 39 |
|
|
|
|
Joined: Jan 2009
Posts: 3,058
Campfire Tracker
|
OP
Campfire Tracker
Joined: Jan 2009
Posts: 3,058 |
Thank you, gents. I will ask on 'smith page
�When in doubt, I whip it out.� Uncle Ted
|
|
|
|
Joined: Nov 2008
Posts: 4,204
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2008
Posts: 4,204 |
You are going to have a bunch of holes to plug, but I guess that's ok. Filler screws or black shoe polish should work (unless it is stainless).
|
|
|
|
Joined: Jan 2009
Posts: 3,058
Campfire Tracker
|
OP
Campfire Tracker
Joined: Jan 2009
Posts: 3,058 |
True. Trying to just use what's on hand to save some money. This is gonna be my backup/black timber carbine for an elk hunt next year.
Shoulda hung onto the .350 model 7 CDL that scope was on originally.
�When in doubt, I whip it out.� Uncle Ted
|
|
|
|
Joined: Jan 2009
Posts: 10,817
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2009
Posts: 10,817 |
Want to put a Vari-X III 1.75-6x32mm E w German No.1 onto my .358 Frontier w/o going to High or Extra-High rings.
Took the four hex screws outta the fwd base but it won't come off. Looks like two blued steel studs also keep base on barrel.
The manual, of course, doesn't even want you to use a conventional scope on a Frontier, so it gives no clue.
Figured I'd check with Y'all before I break out a pry bar to see if any of you have successfully overhauled a Frontier for std scope with ocular bigger than 1-in. or so. .................CC,,,,,,,I own a 300 WSM Ruger Frontier. Know what you are trying to do, but imo, it would be more trouble than what it would be worth in removing the forward scout mount. And imo it wouldn't necessarily look all that great with the holes and studs exposed on the barrel top below the scope unless a smith fills them in and removes the studs for you. Then of course you'll lose the scout scope option. Also and for me anyway, the added weight of the scout mount makes the rifle balance better. Right now I,ve got a 3x9x40 conventionally mounted scope using the high ring forward and a x-high at the rear. Though as I recall, my shooting buddy uses a low ring on the front and a medium ring on the rear on his 338 Fed Frontier using a 2-7x33 VX2. There is a direct link to a Ruger Frontier article from gunblast.com going back to 2005 which I'll give to you in my next post. There you'll see a pic or two with a 2-7x33 VX2 mounted on it. Imo, you should settle for that look rather than removing the forward scout mount and going through all of that trouble.
28 Nosler,,,,300WSM,,,,338-378 Wby,,,,375 Ruger
|
|
|
|
Joined: Jan 2009
Posts: 10,817
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2009
Posts: 10,817 |
Here is the link......www.gunblast.com/Ruger_FrontierRifle.htm
I was off by 1 mm on the 2x7 VX11 objective. A 32 not a 33. No matter though.
Nothing wrong with that look in the Quinn pic with the scout mount on the barrel.
28 Nosler,,,,300WSM,,,,338-378 Wby,,,,375 Ruger
|
|
|
|
Joined: Jan 2009
Posts: 3,058
Campfire Tracker
|
OP
Campfire Tracker
Joined: Jan 2009
Posts: 3,058 |
Thinking I'm gonna get a higher set of Target Grey 30mm rings and drop a VX3 1.5-5x IR on it. Really wanted to use that German No. 1 setup but don't wanna tear all that stuff off
Hell, I may finally trim the old 760 '06 back to 19-20 in. and stuff it w 200- or 220-gr. NPTs and put the No. 1 reticle on it for snap-shooting rig...
�When in doubt, I whip it out.� Uncle Ted
|
|
|
|
Joined: Jan 2009
Posts: 10,817
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2009
Posts: 10,817 |
Thinking I'm gonna get a higher set of Target Grey 30mm rings and drop a VX3 1.5-5x IR on it. Really wanted to use that German No. 1 setup but don't wanna tear all that stuff off
Hell, I may finally trim the old 760 '06 back to 19-20 in. and stuff it w 200- or 220-gr. NPTs and put the No. 1 reticle on it for snap-shooting rig...
.........That is a much better plan.
28 Nosler,,,,300WSM,,,,338-378 Wby,,,,375 Ruger
|
|
|
|
557 members (10gaugeman, 1minute, 160user, 1OntarioJim, 1234, 1Longbow, 59 invisible),
2,191
guests, and
1,347
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,927
Posts18,479,845
Members73,953
|
Most Online11,491 Jul 7th, 2023
|
|
|
|