Thanks, gnoahhh.
JG,
The best price on the West Systems 101 kit that I've found is the link I posted. That may be the way to go for your cracked stock.
Just me, I'd still drill a few holes thru the crack from inside the inletting to facilitate getting material way down in there. If you have a turkey injector or something like that to inject the material, then let it wick into the crack before compression in the padded vice.
Be sure you got some solvent or that injector will be toast.
You may want to get epoxy solvent when you order the kit. It will come in handy cleaning up.
Let us know how it works out.
DF
