Here is a photo of the 235g Speer loaded into a .375 Winchester cartridge. The case was trimmed back .136" from the minimum 2.010". Also shown is a loaded 200g Sierra. The Speer is loaded to 2.560" per spec, although it cycles and chambers at a somewhat longer length.

The photo clearly shows the 235g Speer has a much thinner jacket at the nose than does the 200g Sierra.
[Linked Image]

Ordered a Lee .375 Win crimp die. Without it the Speer is easy to push back into the case.




Last edited by Coyote_Hunter; 08/30/17.

Coyote Hunter - NRA Patriot Life, NRA Whittington Center Life, GOA, DAD - and I VOTE!

No, I'm not a Ruger bigot - just an unabashed fan of their revolvers, M77's and #1's.

A good .30-06 is a 99% solution.