I can't even figure out how to get the action out of the stock. trigger guard comes off with 2 screws,there are no screws in the bottom of the stock just to pins going all the way thru near the bolt. I guess I must drive those out to take it apart. looking in the stock under the trigger guard the whole action looks to be bedded to the the stock so I don't think it will come apart. under the bolt it looks like the end of a screw that comes from the bottom like on most rifles but there is no way to get to the head of that screw. the screw on the back of the receiver like on a Remington has a allen screw on top that I can remove. I guess its bedded to the end of the barrel channel. I find it hard to belive that those to pens are holding such a heavy action and barrel in with nothing on the front.
Last edited by srwshooter; 01/17/18.
