Originally Posted by louiethedrifter
[Linked Image]

I took my favorite 270 Winchester to the range Saturday. I had loaded some R26 with 150 grain LR Accubonds. I started with 59 grains and increased by .5 grain until I reached 61.5 grains. I was only interested in pressure signs when I started. I loaded 5 of each. I shot 3 of the 59gr. then proceeded on with 3 shots of each until I was at the first 61.5 with no signs of pressure. After noticing that I had basically a 1" ragged hole from all the shots ( couple of fliers on my part), I decided to put up a new target and see how well it would shoot. This is 4 shots at 100 yards.

61.5 gr. R26
150 gr.Nosler LRAB
Fed. 210M
Nosler Brass.

I hope to check velocity soon.



Nice shooting and thanks for the Research on testing loads. I've been looking for some data for similar load.
R26 seems to work very well indeed!


HMM-161, HMM-364
Semper Fi Brothers