this is a Winchester mod 94AE hammer spring guide rod(PICTURE IN ATTATCHMENT) ,,you will notice ,it has only ONE upper prong ,i assume because of the receiver push button safeties on some year rifles .My 94AE was made in 1984 so has no safeties,but still has the rebounding hammer ,my hammer spring guide rod has TWO upper prongs ,can i still use the guide rod with ONE prong without any problems ?just wondering since my rifle has no safety button on right side ,that it will have a gap causing the hammer to bind or move sideways .I want to grind off the lower rebound legs ,because of light strikes and put a wolffe lower power main spring to lower trigger weight from 6.2 pounds that it has now ,would rather keep original guide rod in original condition ,in case i sell it,or this mods dont work ,hence ,trying this one prong part ,have not found a 2 pronger even on internet
