What I'm saying since it head spaces off the shoulder is
Chamber a dumped round with just a primer in it, on safe
Take it off safe squeeze trigger and snap the primer
That should confirm headspace is Gtg.
And the ogive from Sami spec factory ammo is gonna sit its given distance from the leade .
So if barrel is screwed in too tight into chamber
And factory ammo chambers overly tight , it would indicate a problem
no. Just no. You can not confirm headspace by whether it ignites a primer or not. Even very loose dangerous headspace will still fire, because the firing pin sticks out of the bolt face.
If you want to check headspace, do it right with go/no go gauges. Or don't bother and just shoot it. Not much point in fooling around with bubba solutions that give you a flawed answer.
