Hello all, I haven't been here for some time. Things change as you know in life priorities, interest ,etc. The past few years I've gotten an interest in reloading and gunsmithing.
I have a marlin xl7 in .270win. that I purchased some years ago and as I started to develop some loads for it last year I discovered that the magazine is not long enough to accommodate the actual OCL needed for the chamber. With common factory rounds of different types the bullet jump is .187"-.205". With a 130gn accubond seating depth is still .057" off the lands to work with the mag.capacity length. Is there an aftermarket option for this issue.
Thanks
e3
