Ok, so I looked at the Rem ammo versus the others, then pulled my second box of new Rem ammo.
I then took the two Rem boxes and pulled out 3 rounds from each keeping them separated so I know which was which.
Loaded the rounds I had issues with Saturday, cycled them and tried to see if my lever would seat all the way so the trigger could engage. Couldn’t make it happen.
Loaded the 3 rounds from the new unopened box and did the same thing. Two of the three were very close to seating fully and almost allowing the trigger to engage.
I took one from each box and the one thing I barely noticed was a slightly more pronounced shoulder on the initial box of ammo.
Last edited by addicted; 06/05/19.
