One rarely seen shot size, at least in the U.S., is #7--which is the same as the British #6, apparently the most popular over there for shooting driven pheasants. The nominal diameter is .10, and there are approximately 300 per ounce, as compared to 350 for 7-1/2's and 225 for 6's. That 350/225 gap is the biggest in popular American shot sizes, and 7's fill it neatly.

Bought some high antimony 7's from Ballistic Products a number of years ago when working on handloads for the 28-gauge, and was very impressed. A load of 7/8 ounce in the 28 killed wild roosters well out to 40 yards, using a typical modified choke, and when processing the birds for the freezer found they definitely penetrated better than 7-1/2's.

Have always suspected 1 or 1-1/8 ounces of hard 7's would make a great pheasant load in the 16, just as it does in light 12's in England, but so far haven't tried them in any of our 16's, apparently because of having too much factory ammo on hand. :-)


“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.”
John Steinbeck