If you like to tinker with stuff you can make a pretty good bump die from a Lee FL sizer. Just drill or polish out the neck and then take a case and chuck it on a drill and cover with valve grinding compound and polish the die with very light or no pressure on the shoulder portion. You will need to start with a FL sized case and the graduate to an un-sized or partially sized case. A faster way would be to use a chamber reamer on the die and then polish.
I think Dirt Farmer posted instructions for this.
But the FL size is all you really need every 3rd or 4th loading or anytime you anneal.
Redding will polish their dies for a better fit at a minimal fee and this is worth it to keep from over working the brass especially if you only load for one rifle.
Last edited by Tejano; 09/11/19.
"When you disarm the people, you commence to offend them and show that you distrust them either through cowardice or lack of confidence, and both of these opinions generate hatred." Niccolo Machiavelli
| 
