What is the world coming to.....
If you use a tube type grease gun, install the tube, screw on the top, loosen the top about 1 turn or so, and pump. It will take just a few pumps to get the grease thru the tube. Once the grease comes thru the tube, finish tightening the top.
If you buy it by the 5 gal bucket, remove the top from the gun, stick the tube in the bucket, pull up on the handle and suck the grease into the tube. Lock the handle back, clean off the outside of the tube, and screw the top on. Back the top off about a turn, pump the handle until you get grease thru the tube, then tighten the top.
Getting a little grease on your hands is good for ya.
