Home Forums Hunting & Shooting Mausers and Military Rifles 98 mauser scope mount problem

Z1r,

Yes the EGW rails are top notch. I fixed another mauser last night. One rear screw hole was off. Height was perfect so no shims.

I ran the base screw from inside the rear bridge. When sufficient thread protruded outward, I tapped on the top of the rail. Pull the rail, and the underside had an imprint of where the screw hole needed to be drilled.

The rigid egw rail affixed to the front receiver ring, is always my "proof check".

First shot out the barrel with a new Redfield 2-7 hit the bullseye at 25 yds, so it's close.