I am going to limit the sear engagement on a Pietta 1858 Remington New Army to get rid of the trigger creep .
I have never soldered and will be soldering a small ,thin piece of Mild steel below the full cock notch on the Hammer.
Which solder do I need to use to do this?
I already have some Bernzomatic Metal Work Solder Silver Bearing Acid Core Solder,Lead Free with a 430 Degree F melt temperature., .062 Will this be ok to use ?
Like I said I have never done any soldering
I do have a Bernzomatic Basic torch that I bought at Walmart several years ago I also have a Wood burning pen that also has a soldering tip provided with it,It burns at about a thousand degrees F Should I use the Torch or the woodburning pen ?
I would also appreciate advice on soldering for this project ,