Originally Posted by z1r
The one with the silver shroud is speed locked. Hence, what looks like a two step cocking cam on the bolt. The correct cocking piece is flat bottomed and has a shorter nose. If you are experiencing hard to lift bolt after firing, put the flat bottom P back in. Using the factory adjustable trigger with a standard cocking piece can cause hard bolt lift.


Thank you again. I looked through my stuff and found a cocking piece that matched your description and bingo; works perfect now.

[Linked Image from i.imgur.com]


Bolt is smooth as silk and it cocks smooth also. Timney trigger breaks nice at a little over 3 lbs.

The Campfire comes through again.