Home Forums Hunting & Shooting Gunsmithing Cleaning a old rifle

Get a can of key board air cleaner.
Triple masking the front and back of the barrel by the sight.
Blast the sight quickly with a frost on it
Quickly hit it with the drift.
If that dont work.
And your gonna toss it anyways.
30 tpi small hacksaw down the middle of it
Taped up like before .
Get within 1/16 th to 1/ 32 of the base pf the sight.

Take a pair of needle nose and squeeze the cut together.
Spread open with small flat tip and small hammer
Repeat till it breaks from flex and comes da fugg out.

Dont listen to me.
I'm a dik.....
And neither of these will ever work.....

Just some bullschitt I came up with on the fly....






3 2 1
The experts will be along soon to tell ya how jakked this is.


LMFAO!!!