Originally Posted by ChuckKY
Originally Posted by Jordan Smith
Yes, it will certainly change your DOPE to switch between scope bases of differing inclination amounts.



Jordan, what you are saying is that the same load, rifle and scope sighted in at a 150' zero with a 0 MOA scope base would require a different number of clicks and mil adjustment to go to 300' with a 10 MOA scope base even if both 0 and 10 MOA bases where sighted in at zero at 150' ? Will the 10 MOA base usually require fewer clicks than the 0 MOA scope base?

If you zero the scope at the same distance with both bases, then the only thing that will change is the remaining “up” in the erector after zeroing.