I do have a bunch of the gray AA hulls. Maybe I will try to get some Federal primers and give that a try. I see the following recipe on the Hodgdon site:

Winchester HS hull Longshot Fed. 209A WAA12F114 27.7gr 10,800 PSI 1,330fps

I have had issues with those hulls wrinkling in the past but I should be able to get the crimp station adjusted to eliminate that. I will take a look at the wad guide too. I was recently given a second reloader that needs a few parts and some refurbishing. Maybe I can set it up for hunting loads and leave my original set for trap loads. That way I can just load a few and do more testing without having to switch back and forth.

Thanks,
Jerry

Minnesota; Land of 10,000 Taxes