40 grains looked promising with all 3 bullets, so I loaded up the remaining brass with 40 grains each, divided equally between the 3 bullets.
That gave me enough for two 5 shot groups with each, and a few sighters/foulers for good measure.
Along with testing the loads, I was also wanting to get all the brass shot once , and hopefully get the barrel settled in as well.
I've found in the past some barrels need upwards of 150 rounds before they really get going.
Conditions weren't the best with swirling winds, targets at 200 yards again, and 80*.
When the smoke cleared, no group of the 6 shot, stood out as a winner, all measuring 1 to 2 MOA.
At this point, I wasn't sure what to do next........
