A friend had a 60’ blackjack oak get blown over. We burn wood so he give it to us. I have got it cut back to the main trunk and these rounds are starting at 26-27” and will be about 36-40 At the end. I am cutting them at 14-16” thick but they are so heavy, it takes A 60” peavey to move them Around. My splitter will go horizontal or vertical but the rounds are to heavy to scoot them around
I have access to wedges and have split some of the limb wood that is in the 20” range so I can get it on the splitter but can you do this with the larger rounds ?
I thought about cross cutting but I don’t know if that is possible.
Thoughts ?
