Originally Posted by jwp475
Originally Posted by 577Nitroexpress

Not sure where to post this, but since it is an Alaskan..seems natural here. I am currently finishing up the conversion of my 1895G to 450 AK Imp, and desperately need a set of dies for it. I do have a set, but they
are for the original 450 Straight; they work, but would like to get the correct set. I have talked to all of makers, and the wait is ridiculous, like two years... Somebody must have a set they don't need I buy can off them..or know somebody that does have one?

I am in the finally throws of this, and should be testing it this weekend if the weather holds out here in eastern CO.

Thanks,
577NitroExpress... <<< I built one of these too.



Just run you chambering reamer in the ones you have




Dies are hardened to 50 Rockwell, would not cut and probably destroy the reamer..and be too large.