That's an easy one. Pull the stock off. Spread the crack a little. Squirt in some super glue. Wrap the stock tight with some surgical tubing. Leave it for a few minutes and it's stronger than new.
I have total confidence in the super glue, but if you want to use epoxy, the brownell's accraglass is the way to go.
One caveat, If the crack is old and oil/dirt has soaked into the surface you'll need to use one of the above mentioned methods in order to get down to fresh wood. If the crack is new and the wood still fresh and porous, Superglue is the trick.
Weagle
Last edited by weagle; 08/06/07.
