Any FL die can be turned into a body or bump die by reaming out the neck a half caliber. The body can also be honed for a perfect fit to your chamber. Lee will do this for a nominal fee also. I buy bargain bin dies and then do the mods on them when I can find the right die.
Exactly.
You can buy a Redding body die, but reaming the Lee FL die does the job and for a lot less.
You'll always need a body die with the Lee Collet neck sizer. This is the way I solved it. It takes some work as these dies are pretty hard.
You can also use a larger size, same body. You can use a .308 FL die as a body die for a 7mm-07, etc.
This one was a 22-250, I didn't have the next size up, so I reamed the neck.
DF