Originally Posted by The_Real_Hawkeye
Originally Posted by mjbgalt
New 22/250 Savage model 10. First cartridge chambered and ejected fine. Second went in most of the way with a bit of reluctance and then stopped. Now it won't come out and I have a loaded cartridge stuck. Extractor tore a bit of brass off and skipped over.

Would really rather not unscrew the barrel and go thru that hassle.

Anyone got tricks? Think I will pass on hammering a rod down the barrel lol

Easy. Cleaning rod down the barrel. Face muzzle (with rod in it) down range, but towards a post or wall. Shove the rifle muzzle, with rod inserted, into the post or wall. Out pops the stuck cartridge.


I read "face muzzle" and almost experienced a moment of TDS......then I continued reading...
Good process.
Remove the bolt first so you have one less thing flopping around.

-OMotS


"If memory serves fails me..."
Quote: ( unnamed) "been prtty deep in the cooler todaay "

Television and radio are most effective when people question little and think even less.