Thanks for the tip Dan.
Dang Riflecrank, you guys are having too much fun here, is that the Rough and Ready sight on that Roller Saint Bagwell used to speak about?
I've had a slight delay, i need to get back and file the factory Shiloh front sight blade down on the 50-70 to proper height, then make a file cut copper penny front sight, see what the ladder tells me out to around 300 yards or so for sight correlation marks, i think my load with the 530gr greaser at 1250 will still lay a pretty good whop on critters to 300.
Yes, Rough and Ready rear and the Beach front flipper combo.
I cannot file that front on mine.
Need to try your Sharps BP load in my Roller with a 535-grainer, .509" to .510"-sized of 1:20 alloy and grease-lubed.
For smokeless, a grain or two more H322 with my powder-coat-painted, hardened .512"/ 680-grain Hoch, or the 650-grain Saeco.
Bill told me this about shooting smokeless loads in BPCR rifles:
"Smokeless IS good clean fun in these rifles, and I wouldn't call it sacrilege.
But it is not the whole experience. By so doing you are simply shooting a single shot rifle--not a BPCR.
It's sort of like taking your sister to the prom.
You are at the prom, with a girl, but you are not getting the whole prom package."
I always was a bit backward socially.
