Work over the MKII, its easy to do yourself. There are diagrams on the net that show you how. Just don't go as far as they say. Also, you can go to the hardware store and buy a coil spring that is lighter in weight than the factory one. These work well in both the MKII and Hawkeye with the LC6. Generally the LC6 only needs a lighter spring and very minimal polishing. The mkII needs material removed from the sear and then polish it out. I've brought them down to a smooth crisp 2.5 pound pull. Just take your time and check periodically. Don't remove too much, or you will deem it unsafe and you'll be looking for a new sear. Ebay has them at times.
