Once in a while you'll run into some that are hard to get out but most I've had didn't require a lot more effort than civvy brass. You can cut the crimps out with a chamfer tool or a counter sink if you don't want to purchase something special; I bought the $10 Hornady similar to this:
https://www.amazon.com/Lyman-Reloading-Primer-Pocket-Reamer/dp/B000NOOQY4/ref=mp_s_a_1_4?crid=2Z92OUROG73JX&keywords=primer+pocket+reamer&qid=1637375924&sprefix=primer+pocket+%2Caps%2C193&sr=8-4
Take it out of the handle and chuck it in a drill.
Yep, and if you don’t want to chance screwing up the threads go to the local hardware store and get a ready rod coupler. Screw it into the coupler then chuck in a drill.