This Pertronix Flamethrower distributor came on the SB 327 in my ‘68 Suburban and has worked flawlessly until now. After recently reworking the cylinder heads, I reinstalled the distributor as removed. However, now it does not produce spark.
Checks confirm that it is getting 12+ volts from the switch and good grounding. I have disassembled the dist cap and can find nothing amiss, but am very unfamiliar with this thing and do not know the diagnostic procedure. I have been unable to find such info online – even at Pertronix web sites.
I will appreciate receiving a source for such info or an explanation of the process here if not too consuming of your time. Thanks.
