OK now. Got some time with my 99 tonight. I do have a few pics to add also. According to
https://savagelevers.com/serial-number-search/ my rifle was made in 1975. B9052XX.
The barrel is 21" from muzzle to front of receiver, and has a flat plug in the dovetail slot. There are no obvious tapped holes for a sight at the rear of the barrel. There are two tapped holes at the front of the barrel and these are 1.950" center to center. The left side of the barrel has a 'F' stamped into it, but normally this is covered by the forend. It is marked 'model 99CD Series A', 'cal 250 Sav', and 'Westerfield Mass'.
The trigger is grooved. The grip cap is checkered.
There are no serial numbers on either forend or buttstock. The buttpad is a dark brown ventilated one marked Savage. Under that is a white line spacer, with a black base marked 'pachmayer' on the inside (pics later). Length of pull is 13 1/2".
Apparently I will have to edit my pics smaller. They're to large to post.
Any clarification on my info is appreciated. I'm intending to replace the front ramp and add a receiver sight to this rifle.
