I'm glad that fixed the problem. The next question is whether or not this is going to happen again. With the bolt open, try to rotate the sleeve by hand and see if it remains locked properly. If not, there is something wrong with the locking mechanism, which is the little tab that locks into a slot on the root of the bolt handle and keeps the sleeve from rotating until the bolt is fully forward in the receiver. There may be an issue with the little tab or its spring, or possibly the aftermarket safety is causing a problem. You don't want this to happen spontaneously in the field. There is a possibility that everything is OK and that you somehow manually pushed the tab in while horsing on the bolt when it stuck, but it would be best to make sure the sleeve is locking properly.
Last edited by wildhobbybobby; 08/02/22.
