The p322 comes with a loading device for the mags, you slide it over the top and pull it down with your fingers just enough to insert 1 rd and repeat. Any other way they will not stack correctly just like shown in the Dan Zimmerman video. Both of the original mags I received with my p322 IMHO are defective ,when you load them with the factory tool the width of the mag expands unloaded they are .610" and loaded at .630" they don't slide easily thru the loading tool either. More importantly neither of them feeds reliably . I didn't determine the problem until I bought a new extra 20 rd mag. And loaded it, no sticky spot on the new one as it isn't bulging like the originals. Just ran those 20 rds without a problem. Will do some more shooting with the new mag and post reliability of it. Haven't seen any other posts about this issue but I can't believe I am the only one with this problem. Mb
Last edited by Magnum_Bob; 08/21/22.
