Jesus I actually came back here to say I discovered one of the 4 (front one) scope base screws were loose. For those that care I found a youtube video that showed a lot of CVAs have oil in the screw holes from the factory. I used loctite originally but the front one must not have held. I cleaned it all out and re torqued everything so maybe that's why I was getting more wild groups with the XTP having more recoil. So again for those that care if you have a CVA make sure you clean and dry the screw holes. I also saw something about making the forend is adjusted tight and back so I double checked that but it was fine. I don't think I'll be reporting back with my results. Thanks to those of you that tried to help
