Well, I was putting together a few 260 Remington loads and dispensing Ramshot Hunter out of my Uniflow. I then weigh each charge on my RCBS ChargeMaster scale to verify the charge weight. On the last case I had forgot to move the powder funnel to the next case and double charged the case. No big deal I’ll just dump it back in the Uniflow and drop another charge into the pan. The only problem was that I dumped the Ramshot Hunter powder into my ChargeMaster hopper with about 1/2 pound of H4350 in it.
With the H4350 being stick powder and the Hunter being a ball powder I figured it wouldn’t be too hard to separate. I ran to the store and bought a piece of the finest mesh I could find to use as a sifter. After sifting the mixed powder several times I separated out 86 grains of the 90 grains of the mixed in Hunter powder.
Would I have any problem using the 1/2 pound of H4350 with the possibility of 3 grains of Ramshot Hunter mixed in?
