Trigger pull was 5 and a half pounds and crisp. Changed the sear spring out to a Colt factory spring. Trigger pull is 3 and a half pounds!!!!! Factory spring must have come off a Russian tractor or tank.
It was between 4 and 6 pounds, so within factory specs. If it comes in at less than 4 or more than 6, the factory assembler is authorized to simply modify the sear spring till it makes spec. Normally no need to swap springs. The more experienced assemblers can set them at about 4-1/4 pounds, if they so choose, even when using only the 4 and 6 pound test weights.
